View LTA320AB01_150616.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
Product Information
Customer :
SAMSUNG TFT-LCD SAMSUNG TFTTFT-LCD
DATE :12.Jun.2008
MODEL : LTA320AB01 MODEL : LTA320AB01
Any Modification of Specification is not allowed without SEC's Permission.
NOTE :
APPROVAED BY
Customer's Approval
SIGNATURE DATE PREPARED BY
DATE 12.Jun.2008 DATE 12.Jun.2008
LCD Business Samsung Electronics Co . , LTD.
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
1 / 28
www..com
Contents
Revision History -------------------------------------------------------------------------------------------- (3) General Description --------------------------------------------------------------------------------------- (4) General Information --------------------------------------------------------------------------------------- (4) 1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5) 2. Optical Characteristics --------------------------------------------------------------------------------- (7) 3. Electrical Characteristics ----------------------------------------------------------------------------- (10) 3.1 TFT LCD Module 3.2 Back Light Unit 3.3 Inverter Input & Specification 4. Block Diagram ------------------------------------------------------------------------------------------- (13) 5. Input Terminal Pin Assignment --------------------------------------------------------------------- (14) 5.1 Input Signal & Power 5.2 Inverter Input Pin Configuration 5.3 Inverter Input Power Sequence 5.4 LVDS Interface 5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color 6. Interface Timing ----------------------------------------------------------------------------------------- (19) 6.1 Timing Parameters (DE only mode) 6.2 Timing Diagrams of interface Signal (DE only mode) 6.3 Power ON/OFF Sequence 7. Outline Dimension -------------------------------------------------------------------------------------- (22) 8. Packing --------------------------------------------------------------------------------------------------- (24) 9. Marking & Others --------------------------------------------------------------------------------------- (25) 10. General Precaution ----------------------------------------------------------------------------------- (26) 10.1 Handling 10.2 Storage 10.3 Operation 10.4 Operation Condition Guide 10.5 Others
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
2 / 28
* Revision History
Date Jun 12, 2008 Rev. No 000 Page Summary
www..com
all
First issued
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
3 / 28
www..com General Description
Description LTA320AB01 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 32.0" is 1366 x 768 and this model can display up to 16.7 million colors with wide viewing angle of 89 or higher in all directions. This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals for AV application products, and High Definition TV (HDTV). Features RoHS compliance (Pb-free) High contrast ratio, high aperture ratio, fast response time PVA ( Patterned Vertical Align) mode Wide viewing angle (178) High speed response WXGA (1366 x 768 pixels) resolution (16:9) Low Power consumption Direct Type 12 CCFTs(Cold Cathode Fluorescent Tube) DE(Data Enable) mode LVDS (Low Voltage Differential Signaling) interface (1pixel/clock)
General Information
Items Module Size Weight Pixel Pitch Active Display Area Surface Treatment Display Colors Number of Pixels Pixel Arrangement Display Mode Luminance of White Specification 760.0(HTYP) x 450.0(VTYP) 50.5(DMAX) 7,500 (max) 0.51075(H) x 0.51075(W) 697.6845(H) x 392.256(V) Haze 14% , Hard-coating (3H) 8 bit - 16.7M 1366 x 768 RGB vertical stripe Normally Black 450 (Typ.) cd/m2 colors pixel Unit mm g mm mm Note 1.0mm
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
4 / 28
www..com
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.
Item Power Supply Voltage Storage temperature Glass surface temperature (Operation) Center T. Uniformity
Symbol VDD TSTG TOPR
T
Min. GND-1.2 -20 0 -
Max. 13.2 60 50 10 50 1.5
Unit V
Note (1) (2) (2),(5)
G G (3) (4)
Shock ( non - operating ) Vibration ( non - operating )
Snop Vnop
Note (1) Ta= 25 2 C (2) Temperature and relative humidity range are shown in the figure below. a. 90 % RH Max. (Ta 39 C) b. Relative Humidity is 90% or less. (Ta > 39 C) c. No condensation (3) 11ms, sine wave, one time for X, Y, Z axis (4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
Fig. Temperature and Relative humidity range MODEL LTA320AB01 Doc. No 06-00006-000-G-080612 Page 5 / 28

www..com
(5) Definition of test point 5mm 5mm
1 2
5
LCD Module (Active)
3 4
TOPR : Temperature of the center of the glass surface (Test point 5) T1~ T4 : Temperature of each edge of the glass surface TMAX : The highest temperature of the glass surface
MODEL
LTA320AB01
Doc. No
T should be less than 10
(T = | TOPR - TMAX| )
06-00006-000-G-080612
Page
6 / 28
2. www..com Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent. Measuring equipment : TOPCON RD-80S,TOPCON SR-3, ELDIM EZ-Contrast
Item Contrast Ratio (Center of screen) Response Time G-to-G (Avg)
Symbol C/R Tg YL Rx Ry Gx Gy Bx By Wx Wy L R U D Buni
Condition
Luminance of White (Center of screen) Red
Normal L,R=0 U,D=0 Viewing Angle
Color Chromaticity (CIE 1931)
Green
Blue
White Color Gamut Color Temperature Hor. Viewing Angle Ver. Brightness Uniformity (9 Points)
C/R10
- Test Equipment Setup The measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen. Inverter=62.5 (kHz 2.5kHz, Dimming : Max ) Environment condition : Ta = 25 2 C
MODEL
LTA320AB01
Doc. No
(Ta = 25
2C, VDD=12V, fv= 60Hz, fDCLK=78MHz, IL = 8 mArms)
Min. 2,000 400 Typ. 3,000 8 450 0.636 0.335 0.287 TYP. -0.03 0.614 0.146 0.071 0.290 0.300 79 79 79 79 72 8500 89 89 89 89 25 % (2) SR-3 Degree (6) EZ-Contrast % K (5) SR-3 (5) SR-3 TYP. +0.03 (5),(6) SR-3 Max. 16 cd/m2 Unit Note (1) SR-3 (3) RD-80S (4) SR-3
06-00006-000-G-080612
Page
7 / 28
www..com
Photo detector SR-3 BM-7
Field 1 2
Photo detector
Field
SR-3 : 50 BM-7 : 50 TFT - LCD Module LCD Panel
The center of the screen
Note (2) Definition of test point 228 128 683 1138

Active Area Test Point
384
640
C/R=
G max G min
Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Note (3) Definition of Contrast Ratio (C/R) : Ratio of gray max (Gmax) & gray min (Gmin) at the center point
of the panel
Page
8 / 28
www..com
Note (4) Definition of 9 points brightness uniformity
Buni = 100
( B max - B min) B max
Bmax : Maximum brightness Bmin : Minimum brightness Note (5) Definition of Response time : Sum of Tr, Tf Display data
Black (data off) White (data on) White (data off)
TR Optical Instruments 100% Response 90%
TF
10% 0% TIME
MODEL
LTA320AB01
Doc. No
Note (8) Definition of Viewing Angle : Viewing angle range (C/R
10)
06-00006-000-G-080612
Page 9 / 28
Note (7) Definition of Color Chromaticity (CIE 1931) Color coordinate of Red, Green, Blue & White at center point
Note (6) Definition of Luminance of White : Luminance of white at center point
)elacs( y arg ot yarG neewteb emit esnopser egarevA : G-ot-G
www..com
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected. Ta = 25C 2 C
Item Voltage of Power Supply Current of Power Supply (a) Black (b) White (c) N-Pattern fV fH fDCLK IRUSH IDD Symbol VDD Min. 10.8 50 72 Typ. 12.0 450 450 700 60 48 78 Max. 13.2 800 66 85 4 Unit V mA mA mA Hz kHz MHz A (4) (2),(3) Note (1)
Vsync Frequency Hsync Frequency Main Frequency Rush Current
Note (1) The ripple voltage should be controlled under 10% of VDD. (2) fV=60Hz, fDCLK = 78MHz, VDD = 12.0V, DC Current. (3) Power dissipation check pattern (LCD Module only) a) Black Pattern b) White Pattern c) N-Pattern
(4) Measurement Conditions VDD
100% 90% 10% GND
TRUSH=470 Rush Current IRUSH can be measured when TRUSH. is 470.
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
10 / 28
www..com
3.2 Back Light Unit
The back light unit contains 12 direct-lighting type CCFLs ( Cold Cathode Fluorescent Lamp ). The characteristics of lamps are shown in the following tables. Ta=25 2C Socket
HOT 1 HOT 2 COLD 1 COLD 2
Inverter
LCD Module
COLD 11 COLD 12
HOT 11 HOT 12
Item Operating Life Time
Symbol Hr
Min. 50,000
Typ. -
Max. -
Unit Hour
Note (1)
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value. [Operating condition : Ta = 252, IL = 8.0mA , For single lamp only. ]
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
11 / 28
www..com
3.3 Inverter Input Condition & Specification
Items Input Voltage Input Current Lamp Current Frequency Backlight On/Off Dimming Control Symbol Vin Iin IO FLAMP ON OFF VDIM Conditions Vin=24.0V Vdim=3.3V Vdim=3.3 V Vin=24.0 V Vin=24.0 V Vin=24.0 V Max Lum Min. Lum Specifications Min. 22 7.5 62 2.4 0 3.3 Typ. 24 4.1 8.0 63.5 Max. 26 8.5 65 5.25 0.8 0 V Unit V Adc mArms kHz V Note Ta=252
Steady state After 2 Hours Warm-Up @Vin=24V -
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
12 / 28
C
CI REVIRD ETAG )V5.2(DDV )V3.3(DDV )V3.3(DDV )V3.3(DDV )V3.3(DDV EGATLOV Y EGATLOV Y EGATLOV Y MOCV MOCV MOCV V
FFOV/NOV
BF + GNIRTS-R BF + GNIRTS-R BF + GNIRTS-R BF + GNIRTS-R ROTARENEG-MOCV ROTARENEG- V ROTARENEG- V ROTARENEG- V
ROTARENEG-AMMAG ROTARENEG-AMMAG ROTARENEG-AMMAG ROTARENEG-AMMAG
DDVA )V0.5( V )V0.5( V )V0.5(NIV )V0.5( V LORTNOC ATAD ATAD ATAD ATAD
)FFOV/NOV/DDV/DDVA( ROTREVNOC CD/CD BCP BCP BCP BCP ECRUOS ECRUOS ECRUOS ECRUOS CPF CPF CPF CPF )CCD(YROMEM )CCD(YROMEM )CCD(YROMEM )CCD(YROMEM
CI CI CI REVIRD ATAD REVIRD ATAD REVIRD ATAD
NWOD PETS CD/CD NWOD PETS CD/CD NWOD PETS CD/CD NWOD PETS CD/CD
RELLORTNOC GNIMIT RELLORTNOC GNIMIT RELLORTNOC GNIMIT RELLORTNOC GNIMIT
ROTCENNOC RESU ROTCENNOC RESU ROTCENNOC RESU ROTCENNOC RESU
4. Block Diagram
www..com
CONTROL PCB
CSS
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
LTA320AB PANEL
13 / 28
www..com 5. Input Terminal Pin Assignment
5.1. Input Signal & Power
PIN No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description No Connection No Connection No Connection GND RxIN0RxIN0+ GND RxIN1RxIN1+ GND RxIN2RxIN2+ GND RxCLKRxCLK+ PIN No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Connector : FI-E30S (JAE)
Description GND RxIN3RxIN3+ GND No Connection (Note 1) LVDS OPTION (Note 2) No Connection (Note 1) No Connection (Note 1) No Connection (Note 1) GND Vin Vin Vin Vin Vin
Note 1) No Connection: This PINS are only used for SAMSUNG internal using. Note 2) LVDS OPTION : If this PIN : HIGH (3.3 V) Normal LVDS format : LOW (GND) JEIDA LVDS format SEQUENCE : On = VDD(T1) LVDS Option Interface Signal(T2) OFF = Interface Signal(T3) LVDS Option VDD
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612

Page
14 / 28
www..com
Note(1) Pin number starts from Right side
PCB
Pin No. 1 Pin No. 30
#1
#30
connect name
#1 #30
Fig. Connector diagram
a. All GND pins should be connected together and also be connected to the LCD's metal chassis. b. All power input pins should be connected together. c. All NC pins should be separated from other signal or power.
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
15 / 28
www..com
5.2. Inverter Input Pin Configuration
Connector : S14B-PHA-SM-TB(LF) (JST)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin Configuration(FUNCTION) 24 V 24 V 24 V 24 V 24 V GND GND GND GND GND No Connection Backlight On /Off [ON:2.4 - 5 V, OFF: 0 - 0.8 V] Dimming Control [0V:Min, 3.3V:Max] No Connection
5.3. Inverter Input Power Sequence
20msec [Min] 0.95 Vin 0.1 Vin 1.1sec [Min]
Vin (24V)
Dimming Control ( 0 ~ 3.3 V ) On 0.5sec [Min] Off 0.5sec [Min] Back Light On/Off 2.4 V
0.5sec [Min]
0.1sec [Min]
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
16 / 28
www..com
5.4 LVDS Interface - LVDS Receiver : Tcon (merged) - Data Format (JEIDA & Normal)
LVDS pin TxIN/RxOUT0 TxIN/RxOUT1 TxIN/RxOUT2 TxOUT/RxIN0 TxIN/RxOUT3 TxIN/RxOUT4 TxIN/RxOUT6 TxIN/RxOUT7 TxIN/RxOUT8 TxIN/RxOUT9 TxIN/RxOUT12 TxOUT/RxIN1 TxIN/RxOUT13 TxIN/RxOUT14 TxIN/RxOUT15 TxIN/RxOUT18 TxIN/RxOUT19 TxIN/RxOUT20 TxIN/RxOUT21 TxOUT/RxIN2 TxIN/RxOUT22 TxIN/RxOUT24 TxIN/RxOUT25 TxIN/RxOUT26 TxIN/RxOUT27 TxIN/RxOUT5 TxIN/RxOUT10 TxOUT/RxIN3 TxIN/RxOUT11 TxIN/RxOUT16 TxIN/RxOUT17 TxIN/RxOUT23 JEIDA -DATA R2 R3 R4 R5 R6 R7 G2 G3 G4 G5 G6 G7 B2 B3 B4 B5 B6 B7 HSYNC VSYNC DEN R0 R1 G0 G1 B0 B1 RESERVED VESA -DATA R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 HSYNC VSYNC DEN R6 R7 G6 G7 B6 B7 RESERVED
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
17 / 28
www..com
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL COLOR DISPLAY (8bit) R0 BLACK BLUE GREEN BASIC COLOR CYAN RED MAGENTA YELLOW WHITE BLACK 0 0 0 0 1 1 1 1 0 1 DARK 0 : : LIGHT R1 0 0 0 0 1 1 1 1 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 R2 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 RED R3 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 R4 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 R5 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 R6 0 0 0 0 1 1 1 1 0 0 0 R7 0 0 0 0 1 1 1 1 0 0 0 G0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 GREEN G1 G2 G3 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 G4 G5 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G6 G7 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 B0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 B1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 B2 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 BLUE B3 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 B4 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 B5 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B6 0 1 0 1 0 1 0 1 0 0 0 B7 0 1 0 1 0 1 0 1 0 0 0 R0 R1 R2 R3~ R252 R253 R254 R255 G0 G1 G2 G3~ G252 G253 G254 G255 B0 B1 B2 B3~ B252 B253 B254 B255 GRAY SCALE LEVEL
RED BLACK
DARK
LIGHT
GREEN BLACK
DARK
LIGHT
BLUE
Note) Definition of Gray : Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level) Input Signal : 0 = Low level voltage, 1 = High level voltage
MODEL
GRAY SCALE OF BLUE
GRAY SCALE OF GREEN

GRAY SCALE OF RED
1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
18 / 28
www..com
6. Interface Timing
6.1 Timing Parameters ( DE only mode )
SIGNAL Clock Hsync Vsync Active Display Period Vertical Total Active Display Period Horizontal Total Frequency ITEM SYMBOL 1/TC FH FV TVD MIN. 72 50 TYP. 78 48 60 768 MAX. 85 66 Unit MHz KHz Hz lines NOTE -
Vertical Display Term
TVB
773
802
1200
lines
-
THD
-
1366
-
clocks
-
Horizontal Display Term
TH
1460
1624
2000
clocks
-
Note) This product is DE only mode. The input of Hsync & Vsync signal does not have an effect on normal operation. (1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system (2) Internal VDD = 3.3V
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
19 / 28
www..com
6.2 Timing diagrams of interface signal ( DE only mode )
TV TVD TVB
DE
TH THD
DE
DCLK
TC
DATA SIGNALS
TC TCH TCL
DCLK
TDS TDH
0.5 VCC
DISPLAY DATA
TES
0.5 VCC
DE
0.5 VCC
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
20 / 28
www..com
6.3 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off sequence should be as the diagram below.
0T1 : VDD rising time from 10% to 90% T2 : The time from VDD to valid data at power ON. T3 : The time from valid data off to VDD off at power Off. T4 : VDD off time for Windows restart T5 : The time from valid data to B/L enable at power ON. T6 : The time from valid data off to B/L disable at power Off. The supply voltage of the external system for the Module input should be the same as the definition of VDD. Apply the lamp voltage within the LCD operation range. When the back light turns on before the LCD operation or the LCD turns off before the back light turns off, the display may momentarily show abnormal screen. In case of VDD = off level, please keep the level of input signals low or keep a high impedance. T4 should be measured after the Module has been fully discharged between power off and on period. Interface signal should not be kept at high impedance when the power is on.
MODEL
LTA320AB01
Doc. No
V 4.2 V 4.2 V 4.2 V 4.2
1000msecT5 (Recommend Value) 100msecT6 (Recommend Value)
06-00006-000-G-080612
Page
21 / 28
7. Outline Dimension (Front View)
www..com
Model
LTA320AB01
Doc. No
06-000-G-080612
Page
22 / 28
7. Outline Dimension (Rear View)
www..com
Model
LTA320AB01
Doc. No
06-000-G-080612
Page
23 / 28
www..com
8. PACKING
8.1 CARTON (Internal Package)
(1) Packing Form Corrugated fiberboard box and corrugated cardboard as shock absorber (2) Packing Method
Packing -Pallet Box
Direction be able to open it
Cushion-Foam LCD Module Cushion-Foam LCD Module Cushion-Foam Pallet-Plastic
8.2 Packing Specification
Item Specification 24ea / (PackingPallet Box) Remark 1. 168 Kg / LCD (24ea) 2. 14 Kg / Cushion-pallet (4ea) 3. 8.8 Kg / Packing-Pallet Box (1ea) 4. Cushion-pallet Material : EPS 5. Packing-Pallet Box Material : DW4 1.Pallet weight = 8kg 2. 8Kg/Pallet
LCD Packing
Pallet Packing Direction Total Pallet Size Total Pallet Weight
1Box / Pallet Vertical H x V x height 198.8 kg
1150mm(H) x 985mm(V) x 1161mm(height) Pallet(8kg) + Module(7*24=168) + Cushion(up+botton=14kg) + Pallet-BOX(8.8kg)
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
24 / 28
www..com
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified location on each product. (1) Parts number : LTA320AB01 (2) Revision: Three letters (3) Lot number : X X X X XXX XX X Cell Position No. (In the Glass) Glass No. (In the one Lot) Lot No. (Glass) Month Year (Note1) Product code Line (4) Nameplate Indication Week code : 05 29 LTA320AB01
40mm
week year
80mm
(5) Packing box attach
LTA320AB01
XXXX
12
(6) Others 1. After service part Lamps cannot be replaced because of the narrow bezel structure. MODEL LTA320AB01 Doc. No 06-00006-000-G-080612 Page 25 / 28
165mm
XXX
100mm
XXXXXXXXXX
Revision code Lot number
Part number
Box serial number
www..com 10. General Precautions
10.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly using all mounting holes. Be careful not to twist and bend the Module. (b) Because the inverter use high voltage, it should be disconnected from power before it is assembled or disassembled. (c) Refrain from strong mechanical shock and / or any force to the Module. In addition to damage, this may cause improper operation or damage to the Module and CCFT back light. (d) Note that polarizers are very fragile and could be damage easily. Do not press or scratch the surface harder than a HB pencil lead. (e) Wipe off water droplets or oil immediately. If you leave the droplets for a long time, staining or discoloration may occur. (f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth. (g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane. Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the polarizer due to chemical reaction. (h) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth . In case of contact with hands, legs or clothes, it must be washed away with soap thoroughly. (i) Protect the Module from static, or the CMOS Gate Array IC would be damaged. (j) Use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (k) Do not disassemble the Module. (l) Do not pull or fold the lamp wire. (m) Do not adjust the variable resistor located on the Module. (n) Protection film for polarizer on the Module should be slowly peeled off just before use so that the electrostatic charge can be minimized. (o) Pins of I/F connector should not be touched directly with bare hands. MODEL LTA320AB01 Doc. No 06-00006-000-G-080612 Page 26 / 28
www..com
10.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time. It is highly recommended to store the Module with temperature from 0 to 35 and relative humidity of less than 70%. (b) Do not store the TFT-LCD Module in direct sunlight. (c) The Module should be stored in a dark place. It is prohibited to apply sunlight or fluorescent light in storing.
10.3 Operation
(a) Do not connect or disconnect the Module in the "Power On" condition. (b) Power supply should always be turned on/off by the "Power on/off sequence" (c) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference should be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference. (d) The cable between the back light connector and its inverter power supply should be connected directly with a minimized length. A longer cable between the back light and the inverter may cause lower luminance of lamp(CCFT) and may require higher startup voltage(Vs).
10.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions. Normal condition is defined as below; - Temperature : 2015 - Humidity : 5520% - Display pattern : continually changing pattern (Not stationary) (b) If the product will be used in extreme conditions such as high temperature, humidity, display patterns or operation time etc.., It is strongly recommended to contact SEC for Application engineering advice. Otherwise, its reliability and function may not be guaranteed. Extreme conditions are commonly found at Airports, Transit Stations, Banks, Stock market, and Controlling systems.
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
27 / 28
www..com
10.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation. (b) Avoid condensation of water. It may result in improper operation or disconnection of electrode. (c) Do not exceed the absolute maximum rating value. ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the Module may be damaged. (d) If the Module keeps displaying the same pattern for a long period of time, the image may be "sticked" to the screen. To avoid image sticking, it is recommended to use a screen saver. (e) This Module has its circuitry PCB's on the rear side and should be handled carefully in order not to be stressed. (f) Please contact SEC in advance when you display the same pattern for a long time.
MODEL
LTA320AB01
Doc. No
06-00006-000-G-080612
Page
28 / 28

▲Up To Search▲

Price & Availability of LTA320AB01

	To Download LTA320AB01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .